Zooming62To set the zoom speed of the wireless controllerFor the wireless controller, first set the overall zoom speed to one of three levels. The wirelesscontroller operates at a constant speed that you can select. Refer to the following table for a summaryof the zoom speed.1 Open the [Zoom Speed Level] screen.[FUNC.] > [MENU] > p > [Zoom Speed Level]2 Touch [Z Fast], [[ Normal] or [] Slow] and then touch [K].• When [Zoom Speed Level] is set to [Z Fast], the sound made by the camcorder's internalmachinery will increase and may be recorded in the scene.3 Touch [Wireless Ctrlr Zoom Speed].4 Touch [ð] or [ñ] or drag your finger along the bar to select the desired constant speed.5 Touch [X].Approximate zoom speeds* (wireless controller)* Measured from full wide-angle to full telephoto.** When the zoom speed is too fast (approximately 1.9 seconds end-to-end), the camcorder will havemore trouble focusing automatically while zooming.Using the Touch Screen’s Zoom Controls1 Display the zoom controls on the touch screen.[FUNC.] > [ZOOM]• The zoom controls appear on the left side of the screen.2 Touch the zoom controls to operate the zoom.• Touch anywhere within the T area to zoom out oranywhere within the S area to zoom in. Touch closer to thecenter for a slow zoom; touch closer to the V/U icons forfaster zooms.3 Touch [X] to hide the zoom controls.[Wireless CtrlrZoom Speed]setting[Zoom Speed Level] setting[] Slow] [[ Normal] [Z Fast]1 (slowest) 4 min. 45 sec. 3 min. 1 min.16 (fastest) 4 sec. 2.5 sec. 1.9 sec.**COPY
