Attaching the Ferrite Core21PreparationsAttaching the Ferrite CoreAttach the enclosed ferrite core before you connect the compact power adapter to the camcorder.Attaching the ferrite core to the compact power adapter cable is necessary to suppress RFinterference.Attach the ferrite core to the cable about 6 cm (2.4 in.) from theplug end (the plug to be connected to the camcorder) of thecompact power adapter cable.Pass the cable through the center of the core and wrap it around thecore, then close the unit until it clicks shut.Charging the Battery PackThe camcorder can be powered with a battery pack or directly using the compact power adapter.For approximate charging times and recording/playback times with a fully charged battery pack, referto Charging, Recording and Playback Times (A 175).1 Connect the power cord to the compact power adapter.2 Plug the power cord into a power outlet.3 Connect the compact power adapter to the camcorder’sDC IN terminal.4 Attach the battery pack to the camcorder.• Press the battery pack softly into the battery attachmentunit and slide it forward until it clicks in place.DC IN terminal2 PreparationsCOPY
