Onscreen Displays and Data Code93Onscreen Displays and Data CodeYou can turn most onscreen displays on or off.Repeatedly press D to turn the onscreen displays on/off in the following sequence:mode:• All displays on• Onscreen markers 1• Displays offmode 2 :• Only data code on• All displays on1 The onscreen markers will be displayed only when p >[Onscreen Markers] is set to an option other than [j Off].2 Pressing D has the same effect as touching the screen. Duringsingle photo view and while playing back a scene, the playbackcontrols are displayed only momentarily.Operating modes:About the Data CodeWith every scene or photo recorded, the camcorder keeps a data code (date/time of recording,information about the camera setup, etc.).You can select the information to be displayed with the s / > [Data Code] setting.COPY
