Using Headphones89Using HeadphonesUse headphones for playback or to check the audio level while recording. The following procedureexplains how to adjust the volume.1 Open the [Headphone Volume] screen.[FUNC.] > [MENU] > q > [Headphone Volume]• Touching [FUNC.] is necessary only when performing the procedure in mode.2 Touch [Ô] or [Õ] to adjust the volume and then touch [X].• You can also drag your finger along the volume bar.To adjust the volume during playbackDuring playback, adjust the headphones volume the same way you adjust the speaker’s volume(A 101).IMPORTANT• When using headphones, make sure to lower the volume to an appropriate level.NOTES• Use commercially available headphones with a ∅ 3.5 mm minijack.• When you are monitoring the audio, you can choose to synchronize the audio signal with the videosignal or monitor the audio in real time. Use the q > [Monitor Delay] setting to select themethod. Note that there will be a slight delay when you monitor in real time. Regardless of thesetting, however, the audio and video signals recorded will be synchronized.Operating modes:COPY
