Remote Operation Via the Wi-Fi Remote Application1253 iOS/Android device: Activate Wi-Fi in the settings screen.• The network names of detected access points will appear.4 iOS/Android device: Touch the access point with the same SSID displayed in step 2.• If you have performed this procedure before and you have not changed the camcorder'spassword, the connection will be established automatically.5 iOS/Android device: Enter the camcorder’s password set previously.6 iOS/Android device: Enter the URL displayed on the camcorder’s screen into the Webbrowser to start the Wi-Fi Remote application.• The Wi-Fi Remote screen will appear.• As long as you do not change the port settings, the URL is always the same so you may find itconvenient to bookmark it.7 Camcorder: Touch [X].• When the connection has been established, „ appears on the camcorder’s screen. If an iOSor Android device is not connected, the icon will appear in yellow.8 iOS/Android device: Operate the controls on the screen while viewing the image from thecamcorder.9 Camcorder: Touch [FUNC.] > [Wi-Fi Remote] and then touch [Off] when finished.• The Wi-Fi Remote application will end.Wi-Fi Remote Onscreen Controls and DisplaysThe Wi-Fi Remote application features advanced controls for devices with larger screens and basiccontrols for devices with smaller screens. For more details on each of the functions, see the referencepage in parentheses after the function name.COPY
