38Masteringthe BasicsEPlaying Back on a TV ScreenYou can connect the camcorder to a TV or VCR to play back your recordings on a TVscreen.❍ Make sure that “H” is not displayed on the screen. If “H” is displayed, changethe setting ( 69).❍ When you use the TV as a monitor during recording, keep the TV volumeturned down as long as the camcorder’s audio terminals are connected. Anunpleasant high-pitched squeal, called feedback, may be produced if soundfrom the TV speakers is picked up by the microphone.For high picture quality, we recommend using a TV with an S (S1) terminal.TVs with SCART TerminalRefer also to the TV or VCR instruction manual.1. Turn off all devices before starting the connections.2. Connect the PC-A10 SCART Adapter to the TV or VCR’s SCART terminal.3. Connect the STV-250N Stereo Video Cable to the camcorder’s AVterminal and the audio/video terminals on the SCART Adapter.Connect the white plug to the white AUDIO terminal L (left), and the red plug to thered AUDIO terminal R (right) and the yellow plug to the yellow VIDEO terminal.AVAUDIO(L/MONO)AUDIO(R) VIDEOSTV-250N Stereo Video Cable (supplied)Signal flowPC-A10 SCARTAdapter2_D74PAL_E(13-41) 03.2.13 11:24 AM Page 38
