106 Using a Memory CardE❍ The focusing point can be selected only when Focus-Priority is set to [ON] inCARD CAMERA mode. The focusing point returns to the center if you turn offthe camcorder, change from CARD CAMERA mode or move the programselector to [.❍ The focusing point cannot be selected in Stitch Assist mode.❍ The focusing point cannot be selected when using the digital zoom. When youzoom into the digital zoom range, the focusing frame flashes for 4 secondsand disappears. When you return to the optical zoom range, the focusingframe reappears.❍ The focusing point cannot be selected when focusing manually.❍ The focusing point cannot be selected when recording movies on a memorycard.Turning Off the Focus-Priority ModeOpen the menu and select [CAMERA SET UP]. Select [FOCUS PRI.], set it to[OFF] and close the menu.Continuous ShootingYou can capture a quick series of still images with the continuous shooting function.1. Set the camcorder to CARD CAMERA mode.2. Open the menu and select [CAMERA SET UP]. Select [DRIVE MODE], setit to [CONT. ] and close the menu.3. Press and hold the PHOTO button to record the still images.A series of still images will be recorded.4. Release the PHOTO button to end recording.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERAFOCUS PRI.•••ONCAMERA SET UP( 42)DRIVE MODE•••SINGLECAMERA SET UP( 42)5_D74PAL_E(100-138) 03.1.27 7:06 PM Page 106
