121Using a Memory CardEPrinting with the Direct Print FunctionYou can print still images by connecting the camcorder to a printer with Direct Printfunction. The Direct Print function can also be used with the print order settings( 119).❍ Observe the following precautions during printing, otherwise printing may notbe performed correctly.- Do not turn off the camcorder or the printer.- Do not change the position of the TAPE/CARD switch.- Do not detach the cable.- Do not remove the memory card.❍ Still images not recorded with this camcorder may not be printed correctly on aBubble Jet Printer with direct print function.❍ The direct print function is supported by Canon Card Photo Printers with thelogo and Canon Bubble Jet Printers with the logo.❍ Refer to the instruction manual of each printer for information on whichinterface cable to use with the camcorder.The Card Photo Printers CP-10 and CP-100 are supplied with two directinterface cables. Use the cable with the USB logo on the connector (DIF-100).❍ We recommend powering the camcorder from a household power source.❍ Refer also to the instruction manual of the respective printer.❍ The screenshots in this section are examples taken from a printer with directprint function. Options for the [Style] category will differ slightly depending onthe printer.Connecting the Printer to the Camcorder1. Turn off the camcorder and insert a memory card that contains still images.2. Connect a power source to the printer and turn on the printer.Printer withdirect print function5_D74PAL_E(100-138) 03.2.11 10:15 AM Page 121
