25Masteringthe Basics2. Turn the selector dial to select [SYSTEM] and pressthe selector dial.3. Turn the selector dial to select [D/TIME SET] andpress the selector dial.The year display starts to flash.4. Turn the selector dial to select the year, and press the selector dial.• The next part of the display starts flashing.• Set the month, day, hours and minutes in the same way.5. Press the MENU button to close the menu and tostart the clock.Time zone, date and time appear for 4 seconds each time youturn the power on.❍ To change a part of the date or time, press the selector dial at step 4, andmove to the part you wish to change.❍ The date can be set to any year between 2003 and 2030.Displaying Date and Time during RecordingYou can display time zone, date and time in the lower left corner of the screen (thetime zone disappears after 4 seconds). The 4-second display will no longer appearwhen you turn the power on. The date and time display will not be superimposed onyour recordings.1. Press the MENU button to open the menu.2. Turn the selector dial to select [DISPLAY SET UP] andpress the selector dial.3. Turn the selector dial to select [D/T DISPLAY] andpress the selector dial.4. Turn the selector dial to select [ON].5. Press the MENU button to close the menu.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERAED/T DISPLAY••OFFDISPLAY SET UP( 42)2_D74PAL_E(13-41) 03.1.27 7:15 PM Page 25
