39Masteringthe BasicsE4. If connecting to a TV, set the input selector to VIDEO. If connecting to aVCR, set the input selector to LINE.The supplied PC-A10 SCART Adapter is for output only. For analog line-inrecording or analog-digital conversion, please use a SCART Adapter with inputcapability (commercially available).TVs with S (S1)-Video Input TerminalRefer also to the TV or VCR instruction manual.1. Turn off all devices before starting the connections.2. Connect the S-150 S-video Cable (optional) to the S-video terminals.3. Connect the STV-250N Stereo Video Cable to the camcorder’s AVterminal and the audio terminals of the TV/VCR.Connect the white plug to the white AUDIO terminal L (left), and the red plug to thered AUDIO terminal R (right). Do not connect the yellow plug.4. If connecting to a TV, set the input selector to VIDEO. If connecting to aVCR, set the input selector to LINE.VIDEOS(S1)-VIDEOINPUTAUDIOLRS-150 S-video Cable (optional)STV-250N Stereo Video Cable (supplied)Signal flowSignal flow2_D74PAL_E(13-41) 03.2.13 11:25 AM Page 39
