104 Using a Memory CardERecording Still Images on a Memory CardYou can record still images with thecamcorder, from a tape in the camcorder( 107) or from devices connected via theDV terminal or AV terminal ( 108).❍ Do not turn off the camcorder, disconnect the power source or remove thememory card while the card access display (<<< or >>>) in the upper rightcorner of the screen or the card access indicator is flashing. Doing so couldresult in data damage.❍ When you are using a SD Memory Card, make sure that the protect switch isset to allow recording.Make sure to insert a memory card with enough remaining capacity.Recording with the CamcorderIn autofocus mode, the camcorder keeps focusing automatically. Furthermore, thiscamcorder is equipped with the Focus-Priority mode for even more accurate focus. InFocus-Priority mode, you can choose between three focusing points ( 105).However, you can turn off the Focus-Priority mode if you wish to put timing ahead offocusing ( 106).When the program selector is set to [, the Focus-Priority mode is set to ON (only thecenter focusing point available).1. Set the camcorder to CARD CAMERA mode.A white focusing frame appears in the centre of the screen. The camcorder will focus onthe subject in the centre of the screen. To change the focusing point, see Selecting aFocusing Point ( 105).2. Press the PHOTO button halfway.• F and focusing frame turn green when focus is adjusted. Thebeep sounds twice. The picture may appear out of focus for amoment while the camcorder is focusing.• Exposure is locked.• Focus can be adjusted manually with the focus ring when the PHOTO button is pressedhalfway.• When you press the PHOTO button on the wireless controller, recording starts immediately.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACard accessindicatorPHOTO button5_D74PAL_E(100-138) 03.2.3 2:14 PM Page 104
