83Using the Full Rangeof FeaturesEDisplaying the Data CodeOnce date and time are set, the camcorder maintains a data code containingrecording date and time and other camera data such as shutter speed and exposure(f-stop). Only date and time appear when playing back a memory card.❍ The data code display turns off when you turn the camcorder off.❍ The data code may not be displayed if a recording made with this camcorder isplayed back on a different digital camcorder.❍ The data code cannot be displayed in frame advance/reverse playback. Cameradata may not appear in some special playback modes.❍ When the TV screen displays are hidden ( 139), the displays still appear onthe LCD screen. If you turn on the data code, displays other than the datacode will disappear from the LCD screen.Available Data Code Combinations (in PLAY (VCR) mode):Date/Time Camera dataTimeDate & TimeDateDATA CODE(tape only)D/TIME SEL.F1.81/250F1.81/2501.JAN.200312:00:00 PM12:00 PM1.JAN.2003F1.81/250F1.81/2501.JAN.2003F1.81/25012:00:00 PMF1.81/25012:00 PM1.JAN.2003Date/Time &Camera dataDATA CODEbuttonMENU buttonSelector dialSelectbuttonsMENU buttonDATA CODEbutton3_D74PAL_E(42-86) 03.1.27 7:27 PM Page 83
