|
139AdditionalInformationEScreen DisplaysLCD Screen DisplaysYou can hide the displays on the LCD screen to have a clear screen for playback.Open the menu and select [DISPLAY SET UP]. Select [DISPLAYS], set it to[OFF ] and close the menu.• The LCD screen will become completely blank (also the TV screen if connected).• Warning messages still appear, and the data code appears if turned on.• Tape operation displays appear for 2 seconds.• Displays cannot be hidden on the index screen.TV Screen DisplaysWhen you connect a TV for recording/playback, you can hide the displays on the TVscreen. For connecting instructions, see Playing Back on a TV Screen ( 38).Press the TV SCREEN button on the wireless controller.• When the POWER switch is set to CAMERA: The displaysdisappear from the TV screen and appear when you press thebutton again.• When the POWER switch is set to PLAY (VCR): The displays appear on the connected TVscreen and disappear when you press the button again. The setting resets to the OFFsetting when you turn the camcorder off.When the TV screen displays are hidden, the displays still appear on the LCD screen. Ifyou turn on the data code, displays other than the data code will disappear from the LCDscreen.You can also change the setting in the menu during recording:Open the menu and select [DISPLAY SET UP]. Select [TV SCREEN], set it to[OFF] and close the menu.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERATV SCREEN••••ONDISPLAY SET UPDISPLAYS•••••ONDISPLAY SET UPSELF T. D.EFFECT.ON/OFF SETMENUTV SCREENSEARCH SELECTDATA CODEINDEX SLIDE SHOW CARD( 42)( 42)6_D74PAL_E(139-159) 03.1.28 2:46 PM Page 139
|
