IJ Network Scanner Selector EX2 Menu and Setting ScreenIJ Network Scanner Selector EX2 allows you to select the scanners or printers to be used for scanning orprinting over a network from your computer or the operation panel.After installation, IJ Network Scanner Selector EX2 appears in the notification area on the desktop.Important• If you cannot scan over a network, download and upgrade to the latest MP Drivers from our website.• While IJ Network Scanner Selector EX2 is enabled, it periodically transmits packets to check whether itcan communicate with your scanner or printer over the network. When using the computer in a networkenvironment other than the one used to set up your scanner or printer, disable IJ Network ScannerSelector EX2.Note• If the icon is not displayed in the notification area on the desktop, follow the procedure below to start.• Windows 10:From Start menu, click All apps > Canon Utilities > IJ Network Scanner Selector EX2.• Windows 8.1/Windows 8:Click IJ Network Scanner Selector EX2 on the Start screen.If IJ Network Scanner Selector EX2 is not displayed on the Start screen, select the Searchcharm, then search for "IJ Network Scanner Selector EX2".• Windows 7/Windows Vista:From the Start menu, click All Programs > Canon Utilities > IJ Network Scanner Selector EX2> IJ Network Scanner Selector EX2.MenuDisplays a menu when you right-click (IJ Network Scanner Selector EX2) in the notification area onthe desktop.Disable Canon IJ Network Scanner Selector EX2 / Enable Canon IJ Network Scanner Selector EX2Enables or disables IJ Network Scanner Selector EX2.When you select Disable Canon IJ Network Scanner Selector EX2, you will not be able to scanover a network from the operation panel.Enabled: , Disabled:Important• When using a model with which you cannot scan over a network from the operation panel, youcannot scan using the operation panel even if this setting is enabled.Settings...The Scan-from-PC Settings screen appears. You can select the model you want to use.857
