AboutDisplays the version information.In the displayed dialog box, you can change the language to be used in the application. The changewill be reflected after restarting the computer.ExitExits IJ Network Scanner Selector EX2; (Enabled) or (Disabled) disappears from thenotification area on the desktop.Scan-from-PC Settings ScreenRight-click the icon from the notification area on the desktop, then select Settings... to display the Scan-from-PC Settings screen.Your scanner or printer must be selected with IJ Network Scanner Selector EX2 before scanning over anetwork.ScannersMAC addresses of the scanners or printers that can be used over the network are displayed.You can select one scanner or printer per model. Selecting a scanner or printer automatically enablesscanning from the operation panel.InstructionsOpens this guide.Scan-from-Operation-Panel SettingsThe Scan-from-Operation-Panel Settings screen appears. You can select up to three scanners andprinters in total for scanning from the operation panel. You can scan items using the operation panelof the selected scanner or printer, and send the scanned images to your computer over a network.Important• When using a model with which you cannot scan over a network from the operation panel, thatmodel does not appear in Scanners and the setting is not available.Scan-from-Operation-Panel Settings ScreenClick Scan-from-Operation-Panel Settings in the Scan-from-PC Settings screen to display the Scan-from-Operation-Panel Settings screen.ScannersMAC addresses of the scanners or printers that can be used over the network are displayed.You can select up to three scanners and printers in total at the same time. Selecting a scanner orprinter automatically enables scanning from the operation panel.InstructionsOpens this guide.858
