Paper Does Not Feed Properly/"No Paper" ErrorCheck1 Make sure paper is loaded.Loading PaperCheck2 When loading paper, consider the following.• When loading two or more sheets of paper, flip through the paper before loading it. In addition, when youload paper with some paper remaining in the cassette, flip through the remaining paper and the newlyloaded paper before loading.• When loading two or more sheets of paper, align the edges of the sheets before loading the paper.• When loading two or more sheets of paper, make sure the paper stack does not exceed the paper loadlimit.However, paper may not feed correctly at the maximum capacity, depending on the type of paper orenvironmental conditions (very high or low temperature and humidity). In such cases, reduce the amount ofpaper you load at a time to less than half of the paper load limit.• Always load the paper in portrait orientation, regardless of the printing orientation.Loading PaperImportant• When loading paper in the cassette, slide the paper guide on the front side to align with the correspondingmark of page size. Load the paper with the print side facing DOWN, load the paper stack in the center ofthe cassette and slide the paper guides to align with the both edges of the paper stack.Loading PaperCheck3 Is paper too thick or curled?Unsupported Media TypesCheck4 When loading postcards or envelopes, consider the following:• If a postcard is curled, it may not feed properly even though the paper stack does not exceed the paper loadlimit.Load Japanese postcards with their postcode column toward the far end of the cassette 1.1127
