Resending Faxes (Redialing Busy Number)There are two methods of redialing: Automatic redialing and Manual redialing.• Automatic RedialingIf you send a document and the recipient's line is busy, the printer will redial the number after a specifiedinterval.Automatic Redialing• Manual RedialingYou can redial to the recipients dialed by entering the fax/telephone numbers.Manual RedialingImportant• It may be possible that faxes will reach unintended recipients due to the misdialing or incorrectregistration of fax/telephone numbers. When you send important documents, we recommend that yousend them after speaking on the telephone.Sending Fax after Speaking on TelephoneNote• Automatic redialing is enabled by default.• For details on the basic sending operations:Sending Faxes by Entering Fax/Telephone NumberAutomatic RedialingYou can enable or disable automatic redialing. If you enable automatic redialing, you can specify themaximum number of redial attempts and the length of time the printer waits between redial attempts.Enable and specify the automatic redialing setting on Auto redial in Advanced FAX settings under FAXsettings.Advanced FAX settingsImportant• While automatic redialing, the unsent fax is stored in the printer's memory temporarily until thesending fax is complete. If a power failure occurs or you unplug the power cord before automaticredialing is complete, all faxes stored in the printer's memory are deleted and not sent.Note• To cancel automatic redialing, wait until the printer starts redialing, and then press the Stop button.• To cancel automatic redialing, delete the unsent fax from the printer's memory while the printer is on-standby for a redial operation. For details, see Deleting Document in Printer's Memory.Manual RedialingFollow the procedure below for manual redialing.940
