Preview IconShows the settings made on the Booklet Printing dialog box.You can check what the document will look like when printed as a booklet.Margin for staplingSpecifies which side of the booklet is to be stapled.Insert blank pageSelects whether to print the document on one side or both sides of the booklet.Check this check box to print the document on one side of the booklet and select the side to be leftblank from the list.MarginSpecifies the width of the stapling margin.The specified width becomes the stapling margin from the center of the sheet.Page BorderPrints a page border line around each document page.Check this check box to print the page border line.Print Area Setup dialog boxWhen you perform duplex printing, the print area of the document becomes slightly narrower than usual.Therefore when a document that has small margins is printed, the document may not fit on one page.This dialog box allows you to set whether the page is to be reduced when printed so that the documentfits in one page.Use normal-size printingPrints the document pages without reducing them. This is the default setting.Use reduced printingSlightly reduces each document page so that it fits on one sheet of paper during printing.Select this setting when using automatic duplex printing to print a document with small margins.Specify Margin dialog boxThis dialog box allows you to specify the margin width for the side to be stapled. If a document does not fiton one page, the document is reduced when printed.MarginSpecifies the width of the stapling margin.The width of the side specified by Stapling Side becomes the stapling margin.Print Options dialog boxMakes changes to print data that is sent to the printer.Depending on the type of printer driver you are using and the environment, this function may not beavailable.Disable ICM required from the application softwareDisables the ICM function required from the application software.When an application software uses Windows ICM to print data, unexpected colors may be produced555
