Preparing for FaxingConnect the printer to the telephone line and set up the printer before using the faxing functions. Thenspecify the basic setting such as sender information, date/time, and daylight saving time.Important• If the Power Disconnects:If there is a power failure or if you accidentally unplug the power cord, the date/time settings will bereset.• The settings for user information and directory will be retained.• All faxes stored in the printer's memory, such as unsent and received faxes, will be lost.If the power disconnects, the following will apply:• You will not be able to send or receive faxes, make copies, or scan originals.• When you are connecting the telephone, whether or not you can use it depends upon yourtelephone line or telephone.Setting Up PrinterThe printer must be set up depending on your telephone line and use of the faxing function. Follow theprocedure below to set up the printer.1. Connecting Telephone Line2. Setting Telephone Line Type3. Setting Receive ModeNote• You can set the fax setting according to the instruction on the touch screen.Easy setupIf you set up according to the instruction on the touch screen, the receive mode is set to TEL prioritymode or FAX only mode. To receive faxes with DRPD or Network switch, change the receivemode.Setting Receive ModeSpecifying Basic Settings for FaxingSetting Sender Information918
