Chapter 33-27F-3-937) Remove the E-ring [16], retaining ring[17], 3 gears [18], and then detach 3timing belts [19] and the parallel pin[20].F-3-948) Remove the resin E-ring [21], pulley[22], and belt [23]. Before removing thepulley [24], you need to remove thefeeding unit.F-3-95Loosen the screw [26] of the tensionarm [25]; then, force the arm clockwiseto mount it. When you have attached thetiming belt [23], tighten the screw [26].F-3-963.4.5.9 Removing theFeeder Unit 0007-16311) Remove the screw [1], and pull out thebusing [2]; then, detach the originalpickup tray [3].[14][15][17] [19][19][18][18][18][16][20][22][21][24][23][23][25][26]
