Chapter 33-62F-3-233When mounting the platen roller [11],and the roll holder, be sure that the rollshaft [13] is fitted in the cut-off [14] ofthe base.F-3-2343.4.10 Delivery ReversingRoller (lower)3.4.10.1 Removing theLower DeliveryReversing Roller 0007-1677If you are replacing the roller segment ofthe lower delivery reversing roller,1) Open the original pickup tray, and pushup the roller segment [1] to detach.F-3-235If you must detach the whole of thelower delivery reversing roller, gothrough the following steps:3.4.10.2 Removing theRear Cover 0007-27271) Open the feeder cover and the originalpickup tray; then, remove the screw [1].[1]
