Chapter 33-70The while plate is attached to the frameusing double-sided sponge tape (8locations).If you have detached it, be sure to attachit back in place using new double-sidedsponge tape.2) Remove the 2 screws [1], and detach theread roller 2 roll.F-3-2633.4.12 Separation Guide Sheet3.4.12.1 BeforeReplacing theSeparation GuideSheet 0007-1689Before Replacing the Separation GuideSheetYou will need a stubby screwdriver forreplacement; if it is not available, detachthe front cover and the feeder cover.3.4.12.2 Removing theFront Cover 0007-27521) Open the feeder cover [1], and removethe screw [2].F-3-2642) Remove the 2 screws [3], and detach thefront cover [4].F-3-2653.4.12.3 Removing theFeeder Cover 0007-27721) Remove the screw [1] and thepositioning pin [2]; then, detach the[2][1][1][2][3][4]
