Chapter 33-60F-3-225Loosen the screw [26] of the tensionarm [25]; then, force the arm clockwiseto mount it. When you have attached thetiming belt [23], tighten the screw [26].F-3-2263.4.9.9 Removing theFeeder Unit 0007-28411) Remove the screw [1], and pull out thebusing [2]; then, detach the originalpickup tray [3].F-3-2272) Remove the 2 screws [4] on the frontcover side; then, remove the lockingsupport [5], and disconnect theconnector [6].F-3-2283) Disconnect the sensor connector [7].4) Remove the 2 screws [8], and detach the[22][21][24][23][23][25][26][3][1] [2][4] [6][5]
