Chapter 33-76F-3-2792) Remove the resin E-ring [3] and bearing[4], and then remove 2 screws [5].F-3-2803) Remove the clutch [6], gear [7], clutchmount [8], bearing [9], and shaft [10].F-3-2813.5.2.6 Removing theReinforcing Plate 0007-28151) Remove 2 screws [1] to remove thereinforcing plate [2].F-3-2823.5.2.7 Removing theFeed Motor 0007-28261) Free the 5 claws [1] of the harness guide;then, disconnect the connector [2].[2] [1][3][5][4][3][10][8][9] [7] [6][1][2][1]
