Chapter 33-81F-3-2993.5.2.12 Removing theRead Roller 1 0007-28571) Remove the resin E-ring [1], and detachthe pulley [2], timing belt [3], andbushing [4].F-3-3002) Remove the resin E-ring [5], and detachthe pulley [6], and the bearing [7].F-3-3013) Remove the 2 resin E-rings [8], anddetach the reader roller 1 [9] as shown inthe figure.Be sure to pull out the roller whilekeeping the sensor flag [12] out of theway.The platen roller [10] will come offtogether with the arm when the readroller 1 [9] is removed; take care not tomisplace the spring [11] of the arm.F-3-302When mounting the platen rollerpressure spring (left, right) [13], be sure[1][2][1] [2] [3] [4][7] [6][5][8][11][10] [12][8][9][11]
