Chapter 33-83F-3-3072) Remove the resin E-ring [3], and detachthe pulley [4] and the bearing [5].F-3-3083) Remove the resin E-ring [6], gear [7],and bushing [8].4) Lift the read roller 2 [9] along the spaceof the shaft opening as show; then, slideit to detach.F-3-3093.5.2.14 Removing thePlaten Roller 0007-28581) Remove the resin E-ring [5]; then,detach the pulley [6], timing belt [7],and bushing [8].2) Remove the resin E-ring [9], and detachthe bushing [10].F-3-3103) Detach the platen roller [11] as showtogether with the roll holder.[1] [2][3] [4] [5][8][7][6][9][5][6] [7] [10] [9][8]
