Chapter 22-432.9 Stamp Operation2.9.1 Outline 0006-3557When the stamp function is selected in fax mode of the host machine, the stamping solenoiddrive signal (S_SOL) from the ADF drive PCB turn on the stamp solenoid (SL2) to put astamp on the original (READ or SENT marking).F-2-38In stamp mode, the machine changes the feed speed to 118 mm/sec at the end of reading.The original will be stepped at a point 1.29 mm from where the delivery reversal sensorgoes off; the stamping solenoid operates for 100 msec, putting a stamp to a point about 10mm from the trailing edge of the original.Stamp solenoid drive signalSTMP_SOLADF controller PCBOriginalStamping solenoid(SL1)
