Chapter 33-5F-3-113.3.1.3 Mounting thePickup Motor 0007-15801) Mount the motor so that the motorpulley and the timing belt are fullymatched then, tighten the screw [1].2) Fit the tension spring [2] to the adjustingplate and the motor base.F-3-123) Fix the adjusting plate in place using 2screws [3], and connect the connector[4].F-3-133.3.2 Feed Motor3.3.2.1 Removing theRear Cover 0007-27151) Open the feeder cover and the originalpickup tray; then, remove the screw [1].F-3-14[4][5][3][1][2][4] [3][3][1]3) Remove the tension spring [3] usingtweezers; then, remove the steppedscrew [4], and detach the pickup motor[5] together with the adjusting plate.
