Chapter 33-17F-3-552) Remove the 2 E-rings [3] and the 2bushings [4]; then, detach the pickup rollerunit [5].F-3-563.4.1.4 Mounting thePickup Roller Unit 0007-16111) Shift up the left/right stopper arm [1],and mount the pickup unit so that thestopper arm is between the separationroller shaft [2] and the pickup rollershaft [3].Make sure that the lever segment of thestop lever [4] is under the stopper arm[1].F-3-572) Secure the pickup roller unit in placeusing 2 resin E-rings [5] and 2 bushings[6].3) Mount the inside cover of the feedercover back into place; then, fix it inplace using 4 screws.F-3-58[1][1][2][3][4][5][3][4][1][2][3][4][5][5][6][6]
