2.7 Monitor Mode (Un)2-112 Panel Operator2.7 Monitor Mode (Un)The monitor mode can be used for monitoring the reference values, I/O signal status, and SERVOPACK inter-nal status.For details, refer to 8.2 Operation in Monitor ModeThe panel operator display numbers beginning with Un.Display Example for Motor SpeedThe example below shows how to display the contents of monitor number Un000.Step Display afterOperation Keys Description1 Press the MODE/SET Key to select the monitor mode.2 Press the UP or the DOWN Key to select Un000.3 Press the DATA/SHIFT Key for approximately one secondto display the data of Un000.4 Press the DATA/SHIFT Key for approximately one secondto return to the display of monitor number (step 1).MODE /SET DATA /MODE/SET DATA/MODE/SET DATA/MODE/SET DATA/
