Xerox PHASER 3635 User Manual

Also see for 3635MFP - Phaser B/W Laser: Features Brochure & specs User guide Quick use guide Evaluator guide

Contents

Xerox PHASER 3635 User Manual Manual pdf 94 page image

5 Network Scanning88 Xerox Phaser 3635 User GuideScan ProcedureThis section describes the basic procedure for scanning. Follow the steps below.Load the Documents – page 88Select Network Scanning – page 89Select Network Scanning Template – page 90Change Feature Settings – page 90Start the Network Scanning Job – page 91Job Status Screen – page 91Stop the Network Scanning Job – page 92NOTE: If an authentication feature is enabled, you may need an account beforeusing the machine. To get an account, or for more information, contact theSystem Administrator.Load the DocumentsYou can load the documents to be scanned either on the Document Glass orthrough the Document Feeder.Document Feeder:The following steps explain how to load documents using the document feeder:1. Before loading the documents into the document feeder, ensure they are ingood condition and remove all staples and paper clips.2. Insert the documents neatly into thedocument feeder, face up. The firstpage should be on top with theheadings towards the left of themachine.3. Place the stack in the middle of theguides aligning the left edge with thedocument feeder tray, and positionthe guides to just touch the edge ofthe documents.