12 MaintenanceXerox Phaser 3635 User Guide 201the front door. The instructions on the screen will tell you how to fit a newcartridge.If you do not want to replace the Print Cartridge now you can select the Abortbutton. The machine will continue to operate but will NOT make copies or prints.1. Open the cover on the right side of the machine. This will reveal the latchused to open the front cover. Open the front cover.2. Remove the Print Cartridge.The instructions that are packedwith the new Print Cartridge will tellyou how to dispose of the used PrintCartridge.WARNING: Only install the correctXerox Print Cartridge in the machine.3. Before unpacking the new PrintCartridge, shake well to distributethe toner. Remove from packaging.4. To fit the new Print Cartridge, makesure the toner is facing the correct way up.5. Insert the Print Cartridge.6. Close the front cover.7. Press the Confirm button on the machine display.L If after fitting a newPrint Cartridge the frontdoor will not close, checkthat the Print Cartridge ispositioned and latchedcorrectly.If you have replaced the Print Cartridge as a result of a “Replace the PrintCartridge” message on the machine display, the machine will assume that youhave fitted a new cartridge and reset the toner usage counters and messages. If,however, you have fitted a new Print Cartridge without being instructed to do soby the machine display, the toner usage counters will need to be reset manually.Staple CartridgeThis procedure shows you how to remove a used Staple Cartridge and replace itwith a new Staple Cartridge.Front cover latchPrint Cartridge
