1 WelcomeXerox Phaser 3635 User Guide 9will only fit into an earthed electrical outlet. This is a safety feature. If you areunable to insert the plug into the outlet, contact a licensed electrician toreplace the outlet.2. Always connect equipment to a correctly grounded power outlet. If in doubt,have the outlet checked by a qualified electrician.Disconnect DeviceThe power cable is the disconnect device for this equipment. It is attached to theback of the machine as a plug-in device. To remove all electrical power from theequipment, disconnect the power cable from the electrical outlet.Emergency Power OffIf any of the following conditions occur, turn off the machine immediately anddisconnect the power cable(s) from the electrical outlet(s). Contact an authorizedXerox Service Representative to correct the problem:The equipment emits unusual odours or makes unusual noises.The power cable is damaged or frayed.A wall panel circuit breaker, fuse, or other safety device has been tripped.Liquid is spilled into the machine.The machine is exposed to water.Any part of the machine is damagedCAUTION: Risk of explosion if battery is replaced by an incorrect type. Disposeof used batteries according to the instruction.Quality StandardsThe product is manufactured under a registered ISO9002 Quality system.If you need additional safety information concerning this XEROX product orXEROX supplied materials you may call the following number:EUROPE: +44 (0) 1707 353434USA/CANADA: 1 800 928 6571Safety StandardsEUROPE: This XEROX product is certified by the following Agency using the SafetyStandards listed.Agency: TUV RheinlandStandard: IEC60950-1, 2001USA/CANADA: This XEROX product is certified by the following Agency using theSafety Standards listed.Agency: UNDERWRITERS LABORATORIES
