Usingthe advanced picturesettings featuresUsingDynamicContrastDynamic Contrast detects changes in picture qualitythat affect the appearance of your contrast settingsand then automatically adjusts the video.To select Dynamic Contrast preference:1 From the the Picturemenu, highlight PictureSettingsand press @).2 Highlight AdvancedPictureSettingsand press @.3 Press ,A. or V" to select DynamicContrast.4 Press "_ or _ to select High,Middle, Low aM Off.Usingthe Static GammafeatureThe Static Gamma feature allows you to adjust thelevels of black in the picture.To adjust the Static Gamma settings:SETUPPress @ and open the PEctnremenu.2 Highlight PictureSettingsand press @.3 Highlight AdvancedPictureSettings and press @.* [n the Static Gamma field, press "9 or _ toadjust the Static Gamma.The adjustment range is within _+5 from center.. if the setting is moved in the minus direction,the detail of black colors will be decreased.. if the setting is moved in the plus direction, thedetail of black colors will be increased.4. To save the new settings, highlight Done andpress @.To revert the factory defaults, highlight Resetand press @.Note: If you select one of the factory-setpicture modes (Sports, Standard, Movieor PC) and then change the Static Gammasetting, the picture mode automaticallychanges to Preference.Selecting the ColorTemperatureYou can change the quality of the picture by selectingfrom three preset Color Temperatures (Cool,Medium, and Warm), as described below.Cool blueishMedium neutralWarln reddishTo select the Color Temperature:SETUP1 Press _ and open the Picture menu.2 Highlight PictureSettingsand press o@.3 Highlight AdvancedPictureSettingsand press _).4' Highlight C0J0r Temperatureand press @.5 in the C0Jer Temperaturefield, press "9 or _ to selectthe m_.te you prefer (Coo[, Medium,or Warm).Press A or V to select either [3 Driveor GDrive,and then press "9 or _ to adjust the settings.• B Drive: _ makes the picture blueish.• G Drive: _ makes the picture greenish.Note: The B Drive and G Drive settingsare connected to the Color Temperaturesettings and will change based on whichsetting is selected in step 5 above.7 To save the new settings, higlalight Done and press @.To revert to the factory defaults, highlight Resel andpress @.Note: If you select one of the factory-set picture modes (Sports, Standard,Movie, or PC) and then change the ColorTemperature mode, the picture modeautomatically changes to Preference.