Toshiba 24SLV411U Owner's Manual

Also see for 24SLV411U: Owner's manual Owner's manual Specifications Energy guide

Displaying TV status informationTo display TV status information :OlSeLAyPress _) on the remote control.The following information will display (it"applicable):* Current input (ANT/CABLE,VIDE0, etc.). If ANT/CABLE is the current input, either "CABLE"(for cable TV) o1""ANT" (l\_r over-the-air broadcasts).®Channel number (if in ANT/CABLEmode)®Channel label (if applicable)®Digital signal strength indicator (bar graph in lowerright corner of box: l_r ATSC signal only)®Stereo, Mono or SAP audio status (when HDMI inputmode, Dolby Digital or PCM)®Video resolution®Aspect ratio of incoming video signal (4:3 or 16:9)® V-Chip rating status®GameTimer (if set)To close tile screen (except ANT/CABLEinput):OISPLAyPress @ again.Understandingthe auto powerofffeatureThe TV will automatically turn itself off afterapwoximately 15 minutes if it is tuned to a vacantchannel or a station that completes its broadcast forthe day.Note:• if you want to set this feature to off, see "No SignalPower Down" on page 49.o If it is possible that you will be away from the TVfor an extended period of time, you should unplugthe power cord.Understandingthe last modememory featureIf the power is cut off while you are viewing theTV, the Last Mode Memory feature automaticallyturns on the TV when the power is resupplied.Note: if it's possible, and you will be awayfrom the TV for an extended period of time youshould unplug the power cord.The following additional information will display forANT/CABLE input (if applicable):®Title®Duration* Detailed description* To display next program information for digitalDISPLAY DISPLAYchannels, press @ again. Pressing O a thirdtime will remove the entire banner.Note: The location of the banner can be movedto the top or bottom of the screen by pressing Aor V while the INFO display is on-screen.52