Toshiba 24SLV411U Owner's Manual

Also see for 24SLV411U: Owner's manual Owner's manual Specifications Energy guide

To turn on the auto aspect ratio feature:1 Press s_, and open the Picturemenu.2 Highlight TheaterSettings and press @.3 in the Auto Aspect Ratio field, select 011.4 To save the new settings, highlight [}oRe and presso@. To revert to the factory defaults, highlightReset and press @.To turn off tile auto aspect ratio feature:Select Off in step 3 above.Selecting the cinemamodeWhen you view a DVD (3:2 pulldown processed) froma DVD player connected to the Vii}E0, C010rStreamHi} (component video), or HDNI inputs on the TV,smoother motion can be obtained by setting theCinema Node to Film.To set the Cinema Mode to Film:(available for 480i and 1080i signals)1 Press s_, and open the Picturemenu.Highlight PictureSettings and press @.3 Highlight Advanced PictureSettingsand press @.4 in the CinemaNode field, select FiJm.5 To save the new settings, highlight [}one and press@. To revert to the factory defaults, highlightReset and press @.To set the Cinema Mode to Video:Select Video in step 4 above.Usingthe FREEZEfeatureTo use the FREEZE feature:1 When viewing the TV, press _ to make thepicture a still picture.To return to the moving picture, press _ again(or any other button).Note: If the TV is left in FREEZE mode formore than 15 minutes, the FREEZE modewill automatically be released and the TV willreturn to moving picture.Using the FREEZE function for any purposeother than your private viewing may beprohibited under the Copyright Laws of theUnited States and other countries, and maysubject you to civil and criminal liability.Adjustingthe pictureSelecting the picture modeYou can select your desired picture settings from fourdifferent modes, as described below.Bright and dynamic picture (factorySports setting)Standard Standard picture settings (factorysetting)Lower contrast fox" darkened roomMovie(factory setting)PC Designed fox" viewing of PC tablesand documentsPreference Your personal preferencesNote: PC mode is available for HDMI and PCinputs only (grayed out for other input sources).To select the picture mode using the menusystem:1 Press s_P and open the Picture menu.Highlight Node and press @.3 Press A or 'V' to select the picture mode youprefer and press @.(conrin ,¢ed)37