Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

Parameters Description UnitWork offset- for take zero point"yes"Work offset in which the coordinate system offset by Z1 must be saved.Basic referenceG54G55G56G57...Coordinatesystem● MCSThe park position is specified in the machine coordinate system. Teaching inthe park position and angular offset is only possible in the machine coordinatesystem.● WCSThe park position is specified in the workpiece coordinate system.XP Park position of tool in X direction (abs) mmZP Park position of tool in Z direction (abs) mmFlush chuck Flush counter-spindle chuck● Yes● NoDIR Direction of rotation● Spindle rotates clockwise● Spindle rotates counter-clockwise● Spindle does not rotateS Spindle speed – (only when the spindles rotate) rev/minα1 Angular offset DegreesZ1 Transfer position (abs.)ZR Position, feedrate reduction (abs or inc)Position from which a reduced feedrate is used.FR Reduced feedrate mm/revFixedstopTravel to fixed stop● YesThe counter-spindle stops at a defined distance away from transfer position Z1and then traverses with a defined feedrate up to the fixed stop.● NoThe counter-spindle traverses to the transfer position Z1.Parameters Description UnitFunction, withdrawingWithdraw blank ● From main spindle● From counter-spindleAlso take zero point Also take zero point● Yes● NoMulti-channel machining11.2 Multi-channel supportTurningOperating Manual, 05/2017, A5E40868721 645