Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

9. Press the "Accept element" softkey.A rectangular cross-hair is displayed.10. Press the "Select element" softkey and press it repeatedly to navigate tothe desired drilling position on the displayed line.To determine the second clearance, the drilling position must be locatedon the line.11. Press the "Accept element" softkey.A frame or grid is displayed.Size (for position pattern "Row", "Frame", "Grid")12. Once the reference point and clearances have been specified, press the"Select element" softkey repeatedly.All expansions of the frame or the grid are displayed.13. Press the "Accept element" softkey to confirm the selected frame or grid.If all elements for the position row or position frame and position grid arevalid, the drilling positions are displayed with blue points.Circle direction (for circle and partial circle)Once the reference point and clearance have been specified, press the"Select element" softkey repeatedly.The displayed circle is shown in the possible orientations.Press the "Select element" softkey to confirm the selected circle or partialcircle.If all elements of the circle or partial circle are valid, the drilling positionsare displayed with blue points.Resetting actionsUndo can be used to reset the last actions.Transfer drilling positions to the cycle and to the program4. Press the "OK" softkey in order to accept the position values.You return to the associated parameter screen form.Press the "Accept" softkey to transfer the drilling positions to the program.Operation with keyboard and mouseIn addition to the operation using the softkeys, you can also operate the functions with thekeyboard and the mouse.Machining the workpiece6.11 Working with DXF filesTurningOperating Manual, 05/2017, A5E40868721 163