Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

All axes are provided in the following order for handwheel assignment:● Geometry axesWhen traversing, the geometry axes taken into account the actual machine status (e.g.rotations, transformations). All channel machine axes, which are currently assigned to thegeometry axis, are in this case simultaneously traversed.● Channel machine axesChannel machine axes are assigned to the particular channel. They can only be individuallytraversed, i.e. the actual machine state has no influence.The also applies to channel machine axes, that are declared as geometry axes.Machine manufacturerPlease refer to the machine manufacturer's specifications.Procedure1. Select the "Machine" operating area.2. Press the , or key.3. Press the menu forward key and the "Handwheel" softkey.The "Handwheel" window appears.A field for axis assignment will be offered for every connected handwheel.4. Position the cursor in the field next to the handwheel with which you wishto assign the axis (e.g. No. 1).5. Press the corresponding softkey to select the desired axis (e.g. "X").- OROpen the "Axis" selection box using the key, navigate to thedesired axis, and press the key.Selecting an axis also activates the handwheel (e.g., "X" is assigned tohandwheel no. 1 and is activated immediately).6. Press the "Handwheel" softkey again.- OR -Press the "Back" softkey.The "Handwheel" window closes.Setting up the machine4.11 Handwheel assignmentTurningOperating Manual, 05/2017, A5E40868721 101