Siemens SINUMERIK 840D sl Operating Manual

Also see for SINUMERIK 828D Turning: Diagnostic manual Function manual Equipment manual Programming manual Operating manual

G code program parameters ShopTurn program parametersPRG Name of the program to be generated T Tool namePL Machining plane D Cutting edge numberMilling direction ● Climbing● ConventionalF Feedrate mm/minmm/toothRP Retraction plane mm S / V Spindle speed or constant cuttingraterpmm/minSC Safety clearance mmF Feedrate mm/minParameter Description UnitTR Reference tool Tool, which is used in the "stock removal" machining step. This is usedto determine the plunge position.Machiningsurface(only for Shop‐Turn)● Face C● End face Y (only when Y axis exists)● Face B● Peripheral surface C● Peripheral surface Y (only when Y axis exists)(only for Shop‐Turn)Clamp/release spindle (only for end face Y/B and peripheral surface Y)The function must be set up by the machine manufacturer.Z0 Reference point in the tool axis Z mmZ1 Pocket depth ∅ (abs) or depth referred to Z0 mmCP Positioning angle for machining area- (only for ShopTurn, machining surface, face Y)Angle CP does not have any effect on the machining position in relation to the workpiece.It is only used to position the workpiece with the rotary axis C in such a way that machiningis possible on the machine.DegreesC0 Positioning angle for machining surface- (only for ShopTurn, machining surface, peripheral surface Y)DegreesDXY ● Maximum plane infeed● Maximum plane infeed as a percentage of the milling cutter diametermm%Programming technology functions (cycles)10.5 Contour millingTurningOperating Manual, 05/2017, A5E40868721 525