Samsung OfficeServ ITP-5121D User Manual

Also see for OFFICESERV 500 Series: Service manual System administration guide Quick setup guide Quick setup guide Quick setup guide

Contents

31DIALING FEATURESAll “DIALING FEATURES” instructions are written to support Overlap Dialing mode.This is the technical name for dialing from a telephone as it has been for manyyears. In recent years the cell phone industry has changed the cell phones to useEnblock Dialing. With this dialing mode all the digits are dialed and then sent tothe carrier after pressing the SEND key. Please check your telephone setup to con-firm what dialing mode is used.SPEED DIALINGYou can dial a preprogrammed telephone number stored in the system-widespeed dial list of numbers 500–999 or from your personal list of numbers 00–49.Your system may be set for 950 system wide numbers. If so the system speed dialaccess codes are 050~999 and the station speed dial codes are 000~049.• From the Main Fixed Feature screen with the handset on-hook, press theSPEED DIAL button or dial 16.• Dial the desired speed dial number.• The telephone number is automatically dialed for you.NOTE: If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before you begin dialing.From the LCD:• Press the MENU button.• Scroll to the PHONEBOOK option, press ENTER.• Scroll to SEARCH, press ENTER.• Choose the method to be used to initiate a speed call, as described below.SEARCH—Search and initiate speed dial calls by: Speed Dial Number, AssociatedNames, Telephone Numbers, Assigned Groups or Previous Calls, registered to thephone.• Scroll to, or dial the associated number of the desired function. (Search,Outgoing Call, Incoming Call, Missed Call, New Number, Edit Group, Delete All,My Own Number) and press ENTER.• Once in the menu, you may dial the selected number, change, delete or regis-ter the number. When the information is displayed, press ENTER to dial thenumber, press MENU to display further options.STATION CALL PICKUPTo pick up (answer) a call ringing at another station, lift the handset and dial 65 plusthe extension number of the ringing phone. If you have a DP key assigned with astation number, you only need to press this DP key with the flashing light to answerthis ringing station. NOTE: If the Hot Keypad feature has been turned off, you mustfirst lift the handset or press the SPEAKER button before you begin dialing.GROUP CALL PICKUPTo pick up (answer) a call ringing in any pickup group, lift the handset and dial 66plus the desired group number (01-20 on the OfficeServ 100, 01-99 on theOfficeServ 500 M, and 01-99 on the OfficeServ 500 L and OfficeServ 7000Series) or press the flashing GROUP PICKUP button if available.NOTES:1. A group pickup button can have an extender for a specific pickup group.2. If the Hot Keypad feature has been turned off, you must first lift the handsetor press the SPEAKER button before dialing the access code.MY GROUP PICKUPIf desired, a new access code can be assigned to pickup ringing calls in the samepickup group as you are in. Like “66” above except you do not need to dial thedesired group number. See your installation company for the assigned accesscode. MY GROUP PICKUP: __________________.PRIVACY RELEASEThis feature will allow another station to join in our conversation by releasing pri-vacy on the C.O. from your phone.To Release Privacy: While you are talking on a C.O. line and you wish to haveother internal parties (or up to three) join the conversation.• Press the PRB button (the PRB indicator will be steady). Inform the otherparty that he/she may now join the conversation.After the other party (or parties) has joined the conversation and you wish toreturn privacy to the line so that no one else can join the conversation, press thePRB button a second time, the PRB button LED will be off.To Join a Non-Private Conversation: When someone has informed you that youcan join a conversation:• Press the C.O. line button that he/she has indicated OR• Dial the C.O. line number that he/she has indicated.30