Samsung OfficeServ ITP-5121D User Manual

Also see for OFFICESERV 500 Series: Service manual System administration guide Quick setup guide Quick setup guide Quick setup guide

Contents

AUTO ANSWER CO CALLSThis option will allow CO calls that directly ring your phone to auto answer. Whena CO call arrives at your station and this option set for ON your phone will soundtwo beeps, the same as when a screened transfer is completed, and you will beconnected to the CO call. In order for this option to work the station must also beprogrammed for auto answer (see SET ANSWER MODE).• While on hook, press TRANSFER and then dial 110.• Dial 151 to turn Auto Answer CO on or 150 to turn it off.• Press TRANSFER to store your selection.NOTE: Outside lines must ring your station directly for the Auto Answer CO towork. Lines ringing a station group will not cause your phone to Auto Answer.DISPLAY SPEED DIAL NAMEThis option allows you to view the name associated with a speed dial number asit is dialed.• With you handset on-hook, press TRANSFER and then dial 110.• Press 111 to turn DISP SPDNAME on or 110 to turn it off.• Press TRANSFER to store your selection.CALLER ID REVIEW ALLThis feature allows display keyset users to review Caller ID information for callssent to their stations.This list can be from ten to fifty calls in a first in, first out basis.The list includes calls that you answered and calls that rang your station but thatyou did not answer. When reviewing this list, you can press one button to dial theperson back. The system must be using LCR to dial the stored number.• With you handset on-hook, press TRANSFER and then dial 110.• Press 121 to turn CID REVIEW ALL on or 120 to turn it off.• Press TRANSFER to store your selection.SECURE OHVAThis option allows you to receive OHVA calls via the speaker while you are on thehandset.• With you handset on-hook, press TRANSFER and then dial 110.• Press 131 to turn AUTO CAMP-ON on or 130 to turn it off.• Press TRANSFER to store your selection.4140Your keyset may be equipped with a Headset mode button. If it is so equippedpressing this button while the light is out will cause the keyset to enter headsetmode and the light will illuminate to indicate this. Pressing the button while thelight is lit will cause the keyset to return to handset mode and the light will go out.HOT KEYPADOn your phone system your keyset’s keypad can be made “live” or “hot” so that it isnot necessary to lift the handset or press the SPEAKER button before you begindialing. Calls can be made and features activated by simply dialing the C.O. linenumber, trunk group access code, intercom number or feature access code. To ac-tivate this feature:• With the handset on-hook, press TRANSFER and then dial 110.• Dial 031 to turn the Hot Keypad on or 030 to turn it off.• Press TRANSFER to store your selection.KEY CONFIRMATION TONEYou can hear a short beep (confirmation tone) each time you press a button on thedial pad. This tone can be turned on or off.• While on-hook, press TRANSFER and then dial 110.• Dial 040 to turn tones off or 041 to turn tones on.• Press TRANSFER to store your selection.REJOINING A PAGEThis feature allows you to hear the remaining portion of an ongoing internal pageafter you return your keyset to idle. To enable this feature:• With the handset on-hook, press TRANSFER and then dial 110.• Dial 051 to turn this feature on or 050 to turn it off.• Press TRANSFER to store your selection.RING PREFERENCEThis feature automatically answers ringing calls when you lift the handset or pressthe SEND button.This method will always answer calls in the order they arrived atyour keyset.When you turn ring preference off, you must press the flashing buttonto answer a call, allowing you to answer calls in the order you choose.• With the handset on-hook, press TRANSFER and then dial 110.• Dial 061 to turn ring preference on or 060 to turn it off.• Press TRANSFER to store your selection.