Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS INTRODUCTIONCOMBINED PROGRAMMING MANUAL NOVEMBER 20011-31.3.3 Station LevelThe system administrator or keyset user can access certain programs at a station with-out using a passcode. At this level, only data for the selected station can be changed.You should refer to the instructions provided in the Samsung DCS Keyset User Guide.• Accessible MMCs at this level are nos. 100–121.1.4 Keys Used for ProgrammingProgramming may be done from any 6-button (6B), 12-button (12B) or 24-button (24B)keyset with a liquid crystal display (LCD). (Refer to the Samsung DCS Keyset User Guidefor a full description of keyset operation.)1.4.1 Soft KeysThe three keys directly belowthe LCD are called soft keys.The left-hand soft key is desig-nated as the LEFT soft key. Thiskey is used to save anychanged data while program-ming, or to move the cursor tothe left on the LCD.The right-hand soft key is des-ignated as the RIGHT soft key.This key is used to save anychanged data while program-ming, or to move the cursor tothe right on the LCD.DCS Euro Display Keysets1.4.2 Other KeysThe following keys perform special functions:VOLUME UP (+) / DOWN (–) Scroll up/down through available options*KEYPAD Enter data using keys 0–9 and [, and dial options*HOLD Clear previous entryANS/RLS Select “ALL” option (e.g. to make data apply to all,rather than selected, stations)SPEAKER Store data and advance to next MMCTRSF Enter programming mode orStore data and exit programming mode* Note: Many MMCs allow you to dial codes using the keypad to select options quickly. Alterna-tively, you can press the VOLUME Up and Down keys (+ and – ) to scroll through and select op-tions. Use whichever method you prefer.