Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 603 (Page 1 of 2)MMC: 603 ASSIGN TRUNK GROUPDCS 33 CI 33 CII 33 816 33 408i 33 408 33Allows the assignment of trunks to a specific trunk group or to several trunk groups. This is veryuseful for programming of LCR when more than one trunk is to be in several dialling plans. Thereare two different modes of operation: (1) sequential and (2) distribute.WARNING: One trunk can appear in more than one trunk group. If necessary, delete the trunkmember from other groups to prevent accidental access.The number of trunk groups is:DCS and Compact II — 11: valid groups are 9 and 80–89.816 — Four: valid groups are 9 and 80–82.408/408i — Two: valid groups are 9 and 8.Valid number of members of trunk groups are:DCS: 01–80Compact I: 01–10Compact II: 01–40816: 01–10408/408i: 1–4PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALLACTION DISPLAY1. Open programming and select 603Display shows (e.g. trunk group 9)[9] TRK GROUPMODE:SEQUENTIAL2. Enter in valid trunk group (see above)(e.g. 81)ORPress UP or DOWN key to make selection and pressRIGHT soft key to advance cursor[81] TRK GROUPMODE:SEQUENTIAL3. Press RIGHT soft key to change modeORPress UP or DOWN key to change mode to member[81] TRK GROUPMEMBER 01:NONE4. Press RIGHT soft key to move cursor to number ofmember and enter valid member number (e.g. 04) viadial keypadORPress UP or DOWN key to make selection and pressRIGHT soft key to move cursor[81] TRK GROUPMEMBER 04:NONE