Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 421 (Page 1 of 2)MMC: 421 MSN DIGITDCS 33 CI 33 CII 33 816 33 408i 33 408 77Provides a method of assigning an incoming MSN call to a specific station. If any entry in MSNDIGIT TABLE matches an incoming call's called party number, either the specific station isalerted, if it is programmed to accept the call, or the call is cleared if it is programmed to rejectthe call.If the incoming called party number does not have a matching entry in the MSN table, the opera-tor is alerted.You can give each MSN number to a specific station and you can select a call waiting option:when a destination is busy, the incoming call must be cleared or camped-on to the station (whichis alerted to the call).There is a total of eight entries on a trunk basis and each entry consists of the following fields:DIGITS Digits to be received (maximum of 10).DAY DEST Destination in day mode - can be a station or a station group.Repeat (B) will be acceptable to the system if received digit is withinnumbering plan for a station or station group..NIGHT DEST Destination in night mode - can be a station or a station group.Repeat (B) will be acceptable to the system if received digit is withinnumbering plan for a station or station group.CALL WAIT Toggles YES or NO: if YES then the call will be camped-on at busydestination while NO gives busy indication.OPTION Accept: the selected destination party will be alerted.Reject: the call is cleared.Note: For each BRI access, two adjacent ports are assigned. You need only change the value for one of thetwo ports; the value for the other port will be changed automatically.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entry