Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 604 (Page 1 of 1)MMC: 604 ASSIGN STATION TOPAGE ZONEDCS 33 CI 33 CII 33 816 33 408i 33 408 33Allows the assignment of a keyset to any of the internal paging zones 1 to 4 and All page (pageplus ∗). The total number of keysets that can receive a page is limited to 80 (DCS) or 40 (Com-pact II) or 12 (816) or 4 (408/408i). A keyset may be assigned to more than one zone.The assignment is controlled by the use of class marks. If a keyset is flagged as “1” in a zonecolumn, it will receive pages for that zone. If the keyset is flagged as “0,” it will not receive pagesfor that zone. Keysets can receive pages for more than one zone.Note: 408/408i systems are assigned internal page zones 1–2 only. Therefore, only these zones can beflagged as “1”. Zones 3 and 4 are flagged as “0.”PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear entryACTION DISPLAY1. Open programming and select 604Display shows ENTRY:STN :1 2 3 4∗01:NONE:0 00012. Enter index number (01–80 or 01–40 or 01–12 or 1–4depending on your system–see above) via keypad(e.g., 04)ORPress UP or DOWN key to make selection and pressRIGHT soft key to move cursorENTRY:STN :1 2 3 4∗04:NONE:000013. Enter station number (e.g., 205) via dial keypadORPress UP or DOWN key to make selection and pressRIGHT soft key to move cursorENTRY:STN :1 2 3 4∗04:205 :00 0 0 14. Move cursor under page zone desired (e.g. 2) by press-ing UP or DOWN key and enter the digit 1 under thezonePress RIGHT soft key to return to step 2 to continue withentriesENTRY:STN :1 2 3 4∗04:205 :010 0 15. Press TRSF to store and exitORPress SPEAKER to store and advance to next MMCDefault Data: No stations assignedAll zone is set (∗ )Related Items: None