Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 733 (Page 1 of 2)MMC: 733 AA PLAN TABLEDCS 33 CI 77 CII 33 816 33 408i 77 408 77Used to call up the customer-recorded and pre-recorded messages into plans compiled in MMC732, AA Translation Table. Pre-recorded messages listed below can be applied and destinationscan be programmed as required. Specific ports are programmed in MMC 735, AA Use Table.There are a total of 64 messages on an AA card:- 48 messages are to be recorded by the user (01-48),- 16 messages are pre-recorded in ROM on the card (49-64).Options are as follows:Dial Option Value Description00 DAY MSG 01-64 Introduction message during Day Mode01 NIGHT MSG 01-64 Introduction message during Night Mode02 ALTER MSG 01-64 Emergency message03 INVLID MSG 01-64 Message when an invalid digit is dialled04 NO ANS MSG 01-64 Message when there is no reply from thedestination05 XFER MSG 01-64 Transfer notifying message06 BUSY MSG 01-64 Message on busy reply07 NO STN MSG 01-64 Message on retrial08 NO ACT MSG 01-64 Message on no action09 CAMP ON On/Off Allow camp-on to busy extension10 ANS DELAY 01-10 Answer Delay11 RETRY CNT 0-5 No of times the AA will try to connect before routingto final destination.12 TRANS TABLE 01-12 Assigning associated TRANS TABLE13 BUSY DEST Dest. Alternative destination on busy14 NO ANS DEST Dest. Alternative destination on no answer15 NO ACT DEST Dest. Default destination on no action16 INVALID DEST Dest. Default destination on invalid actionThere is a total of 12 tables (01-12) in the system, but not all tables have to be used.DESTINATION : STATION, STATION GROUP, AA PLAN NO, REPEAT.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entry