Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 410 (Page 1 of 1)MMC: 410 ASSIGN DISA TRUNKDCS 33 CI 33 CII 33 816 33 408i 33 408 33Allows the system to have Direct Inward System Access (DISA). Because there is a possibilitythat unauthorised calls will be made via this feature, several safeguards have been added. Theuser must be informed of these to prevent unnecessary service calls. DISA can lock out when apredetermined number of invalid consecutive calls are attempted. Callers will then receive ringback tone until a programmable timer has expired. The [ key may be used to initiate new dialtone while in a station-to-station call. The # key may be used to terminate the DISA call and dis-connect the central office line. Multiple central office calls and internal calls are possible.Note: In order to use DISA, the caller must first dial a valid station number, followed by a four-digit pass-code. This passcode is defined in MMC 101, Change User Passcode. DISA users MUST change this pass-code as the default number cannot be used.PROGRAM KEYSUP & DOWN Used to scroll through optionsKEYPAD Used to enter selectionsSOFT KEYS Move cursor left and rightSPEAKER Used to store data and advance to next MMCHOLD Used to clear previous entryANS/RLS Used to select ALL (trunks)FEATURE KEYS0 NORMAL No DISA service1 DAY DISA is available in day mode2 NIGHT DISA is available in night mode3 BOTH DISA is available in both day and night modeACTION DISPLAY1. Open programming and select 410Display shows [701] DISA LINENORMAL2. Dial trunk number ( e.g., 704)ORPress UP or DOWN key to select trunk and pressRIGHT soft keyORPress ANS/RLS key to select all trunks[704] DISA LINENORMALOR[ALL] DISA LINE?3. Dial an option (0–3) from above tableORPress UP or DOWN key to select trunk andpress RIGHT soft key to return to step 2[704] DISA LINENIGHT4. Press TRSF to store and exitORPress SPEAKER to store and advance to next MMCDefault Data: All trunks normalRelated Items: MMC 101 Change User PasscodeMMC 500 System-Wide CountersMMC 210 Customer On/Off (DISA PSWD option)