Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 414 (Page 1 of 1)MMC: 414 MPD/PRS SIGNALDCS 33 CI 33 CII 33 816 33 408i 77 408 33Used on a per-trunk basis to define if a C.O. line is to be either a Metering Pulse (MPD) or a Po-larity Reversal Signal (PRS) trunk. (Note: PRS is not available in the UK.)A Meter Pulse Trunk will detect a C.O.-provided meter pulse. A Polarity Reversal trunk will detectthe line reversal signal which may be provided by the C.O. when the other party answers the out-going call or the outside party clears the call. If the trunk is designated as PRS detection, the callduration timer will be started and the results printed on the SMDR record. PRS detection is alsoessential for dropping a trunk-to-trunk conversation which is unsupervised by an internal party.ACTION DISPLAY1. Open programming and select 414Display shows [701] TRK PRSNONE2. Enter desired trunk number (e.g. 705)ORPress UP or DOWN key to select trunk and useLEFT or RIGHT soft key to move cursor[705] TRK PRSNONE3. Press UP or DOWN key to scroll through optionsand use LEFT or RIGHT soft key to return to step 2 [705] TRK PRSMPD4. Press TRSF to store and exitORPress SPEAKER to store and advance to next MMCDefault Data: NONERelated Items: MMC 508 Call Cost