Samsung DCS Programming Manual

Also see for DCS: User guide Quick reference guide User guide Guide Technical manual

Contents

DCS MMC PROGRAMSCOMBINED PROGRAMMING MANUAL NOVEMBER 2001MMC 116 (Page 2 of 2)ACTION DISPLAY1. Open programming and select 116Display shows[ 201] ALM REM(1)HHMM: ËNOTSET2. Dial station number (e.g., 205)OR[205] ALM REM(1)HHMM: ËNOTSETPress UP or DOWN to select station and press RIGHTsoft key to move cursorORPress ANS/RLS to select all stations[ALL] ALM REM(1)HHMM: ËNOTSET3. Dial alarm number (e.g., 2)OR[205] ALM REM(2)HHMM: ËNOTSETPress UP or DOWN to select alarm and press RIGHTsoft key to move cursor4. Enter alarm time in 24-hour clock format(e.g., 1300 for 1pm)[205] ALM REM(2)HHMM:1300ËNOTSETDisplay will automatically advance to step 55. Dial valid entry from above list for alarm type (e.g. 2,DAILY)[205] ALM REM(2)HHMM:1300ËDAILYORPress UP or DOWN to select alarm type and pressRIGHT soft key to move cursor6. Enter message using above method and press RIGHTsoft key to return to step 2[205] ALM REM(2)Meeting7. Press TRSF to store and exitORPress SPEAKER to store and advance to next MMCDefault Data: Alarms set to NOTSETRelated Items: None